BBS Home
<<< Home  |    AMR Solution  |  Metator RF  |  Metator Solo  |   Metator Tango  |   Metator Acroasis  |
AMR Solution
Brochures
Metator RF 160 KB pdf

Metator RF (Wiireless)


Metator 243 KB pdf

Metator Overview

Metator Tango 180 KB pdf

 Metator Tango (Three Phase Meter)

Metator Solo 185 KB pdf

Metator Solo (Single Phase Meter)

Metator Acroasis


Metator™ is a complete end-to-end Remote Automated Electronic Meter Reading Solution (AMR) from BBS Access. MetatorTM is an excellent solution for restrictive and inaccessible residential, commercial and industrial sites using a built-in or attached Radio Frequency (RF) receiver / transceiver Hand Held Unit (HHU), which can collect meter readings from our AMR-ready energy meter on the fly! Enabling “Walk-by” meter reading, thereafter, the data is swiftly transmitted to the data warehousing operations centre for rapid and real-time processing of collected data to ensure quick and accurate billing to utility consumers.


Features and Benefits

• High quality and tamper-resistant Single-Phase and Three-Phase meters with RF (wireless) capability.
• “Two-way” smart RF technology enabling remote “Walk-by” meter reading and, faulty & tampered meter identification.
• Centralized data collection and recording enabling easy access and analysis of data.
• Web-based application software with graphical and tabular reporting.
• Modular and flexible architecture.


System Architecture

The basic system consists of RF-Enabled Meters, HHU (wireless data communicator), management software solution and vendor service such as Internet, etc.



RF-Enabled Meter
• Reliable omni-communications with error detection
• ACK and Retry between smart meter reader and HHU
• RF working range 433/868/900 MHZ license free bands
• Integrated Master and repeater functions
• Hopping and relaying algorithm for extended communication range


Hand Held Unit (HHU)
• Rugged Shock and weather proof Hand Held Unit
• Ideal for Walk-by & Drive-by low-cost meter data collection
• Collects all the data available inside the meter
• Built-in WLAN port to upload data to Control Server database

<<< back to top




Embedded RF Communications Suite
Built-in RF transceiver for easy and rapid access to meters and to upload data to a host computer

Secure and Accurate Communications
RF data transmission protocol incorporates error detection and encryption to ensure error free data retrieval, boosting efficiency and productivity

Bridge between the RF Meter and Remote Party
RF transceiver module with serial port specially customised for communications with RF Hand Held Unit (HHU) device

Walk-by and Remote Access
Access to different RF meters in inaccessible and hazardous sites

Versatile use in Other Utilities
Flexibility and versatility for extended use with gas and water utilities

For specification, please refer to the Metator RF brochure.

<<< back to top



RF Hand Held Unit
DecLoop
Single Phase Energy Meter

Features
• Class 1, as per IEC62053-21 and -61
• Single Phase 2 wire operation
• Active Energy
• Apparent Energy
• Line Voltage
• Line Current
• Line Frequency
• Power Factor
• Scrolling Display
• Rising Demand
• Maximun Demand Intergration
• Real Time Clock
• Multi Tariff & Seasonal Data
• Event Storage
• Load Profile
• Monthly Billing
• RS232 Port
• IR Port
• Pulse Output on Terminal Block
• Reverse Current Detection

Mechanical Data
Overall dimensions 189mm X 130mm X 60mm
Fascia plate Removable
Printing on fascia plate As per customer requirement
Meter cover seal Two sealable screws. Factory sealed
Terminal cover seal One sealable screw. Field sealable

For specification, please refer to the Metator Solo brochure.

<<< back to top


DecSim
Three Phase Energy Meter

Features
• Class 1, as per IEC62053-21 and -61
• Three Phase 3 wire, or 4 wire operation
• Active Energy
• Reactive Energy
• Line Voltage
• Line Current
• Line Frequency
• Power Factor
• Scrolling Display
• Rising Demand
• Maximun Demand Intergration
• Real Time Clock
• Multi-tariff & Seasonal Data
• Event Storage
• Load Profile
• Monthly Billing
• RS232 Port
• IR Port
• Pulse Output on Terminal Block
• Reverse Current Detection
• Current Imbalance Detection

Mechanical Data
Overall dimensions 275mm X 173mm X 76mm
Fascia plate Hinged transparent cover
Printing on fascia plate As per customer requirement
Meter cover seal Three sealable screws. Factory sealed
Terminal cover seal Two sealable screw. Field sealable

For specification, please refer to the Metator Tango brochure.

<<< back to top




A software for data retrieval from Metator™ series of energy meters. Available in PC or Pocket PC versions.

Samples:
      

Features
• Data export to a local database
• Easy to use graphical user interface
• Four types of user access rights
• Option to expand design with the addition of other types of meter protocols
• Option to upload data collected to a central database

*Microsoft ®.Net Framework Run Time environment required.

<<< back to top
Home   |    Enquiry   |    Sitemap   |    Staff E-mail   |    Staff Portal Copyright © 2007 B.B.S. All rights reserved.